in reference to 100 M3/Hr capacity plant. This plant can produce basically
Oxygen and Nitrogen. However, the plant can be controlled to produce these
products in different standard modes as given below, based on standard
operating conditions:- Production Cycle -I
Oxygen-gaseous-dry-99.5 % and above purity-100 M3/Hr. Nitrogen-gaseous-96-98 % purity -waste product.
Production Cycle -II
Oxygen-gaseous-dry-99.5 % and above purity-93 M3/Hr. Nitrogen-gaseous-99.6 to 99.8 % purity-125 M3/Hr. (Nitrogen Compressor required for filling this Nitrogen into Cylinders- at extra cost.)
Production Cycle -III
Oxygen-gaseous-dry-99.5 % and above purity-93 M3/Hr. Nitrogen liquid 15 to 18 Ltrs. Per hour purity 99.9 %
Production Cycle -IV
Oxygen-gaseous-dry-99.5 % and above purity-70 M3/Hr. Nitrogen gaseous dry-Less than 10 PPM purity = M3/Hr. Nitrogen gaseous dry-Less than 10 PPM purity = M3/Hr.
